Series
CategoryMemory Card Slots
SeriesSD
MODEL7SDCN-F0-0033
DescriptionSD CONN REVERSE H:2.95mm
7SDCN-F0-0033 (SD CONN REVERSE H:2.95mm) is an SD memory card connector in KINGCONN's SD series. It has a 1.00 mm pitch and a mated height of 2.95 mm, with an operating voltage of 100V AC(rms)/DC and a current rating of 0.5 A, withstand voltage of 500 VAC/1 minute, contact resistance of 100 m ohms max, and insulation resistance of 1000M ohms min at 250VDC, over an operating temperature range of -25°C to +85°C. The housing is LCP rated UL94 V-0, contacts are copper alloy, and the shell is stainless steel. Connectors of this type are used in embedded systems, cameras, and handheld devices that read SD storage. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7SDCN-F0-0033 is part of the KINGCONN SD series (Memory Card Slots). The catalogue description reads, verbatim: "SD CONN REVERSE H:2.95mm". Everything stated on this page comes from engineering drawing 7SDCN-F0-0033, revision A, which downloads from this page.
A reverse-type socket flips the card opening and contact orientation, to suit layouts where the card slot faces the opposite way to the component side.
Materials and markings as recorded on the drawing: Housing material LCP S475 UL94 V-0; Contact material COPPER ALLOY; Shell material STAINLESS STEEL; UL flammability rating UL94 V-0; Housing colour BLACK. The part is marked RoHS compliant.
The KINGCONN SD series lists 15 models.
Across the series, pitches cover 1mm and 2.5mm; durability is rated at 5,000 or 10,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Pitch 1.00 mm; Mated height 2.95 mm; Operating voltage 100V AC(rms)/DC; Current rating 0.5 A; Withstand voltage 500 VAC/1MINUTE; Contact resistance 100 m OHMS MAX; Insulation resistance 1000M OHMS MIN. AT 250VDC; Operating temperature -25°C~+85°C.
SD series SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SDCN-F0-0033, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN SD series part (Memory Card Slots). The catalogue description is "SD CONN REVERSE H:2.95mm", and the source drawing is 7SDCN-F0-0033 revision A.
From source drawing 7SDCN-F0-0033 (revision A): Pitch 1.00 mm; Mated height 2.95 mm; Operating voltage 100V AC(rms)/DC; Current rating 0.5 A; Withstand voltage 500 VAC/1MINUTE; Contact resistance 100 m OHMS MAX; Insulation resistance 1000M OHMS MIN. AT 250VDC; Operating temperature -25°C~+85°C; Housing material LCP S475 UL94 V-0; Contact material COPPER ALLOY; Shell material STAINLESS STEEL; UL flammability rating UL94 V-0; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SDCN-F0-0033 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7SDCN-F0-0033 rev. A