Series
CategoryI/O Connectors
SeriesUSB 2.0
MODEL7USB2-F0-0033
DescriptionUSB 2.0 Type-A Reversible Female Board-Mount DIP Connector (Without Rolled Edge)
7USB2-F0-0033 is a USB 2.0 Type-A reversible female board-mount DIP connector, without rolled edge, in KINGCONN's usb-2-0 series. It operates over a temperature range of -40°C to +85°C, with a housing made of thermoplastic in black, contacts made of copper alloy, and a shell of stainless steel or K7. Connectors of this type are used for board-mount USB 2.0 Type-A interfaces in host and peripheral devices where a DIP mounting style is required. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7USB2-F0-0033 is part of the KINGCONN USB 2.0 series (I/O Connectors). The catalogue description reads, verbatim: "USB 2.0 Type-A Reversible Female Board-Mount DIP Connector (Without Rolled Edge)". Everything stated on this page comes from engineering drawing 7USB2-F0-0033, revision A, which downloads from this page.
DIP (through-hole) terminals pass through the board and solder on the far side, which gives the joint more mechanical strength.
Materials and markings as recorded on the drawing: Housing material THERMOPLASTIC; Contact material COPPER ALLOY; Shell material STAINLESS STEEL OR K7; Housing colour BLACK. The part is marked RoHS compliant.
The KINGCONN USB 2.0 series lists 5 models.
This model's own drawing states: Operating temperature -40°C~+85°C.
USB 2.0 series USB Type-A, Type-B, Micro-B & Mini-B Receptacle Selection
This part belongs to the I/O Connectors group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7USB2-F0-0033, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN USB 2.0 series part (I/O Connectors). The catalogue description is "USB 2.0 Type-A Reversible Female Board-Mount DIP Connector (Without Rolled Edge)", and the source drawing is 7USB2-F0-0033 revision A.
From source drawing 7USB2-F0-0033 (revision A): Operating temperature -40°C~+85°C; Housing material THERMOPLASTIC; Contact material COPPER ALLOY; Shell material STAINLESS STEEL OR K7; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7USB2-F0-0033 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7USB2-F0-0033 rev. A