7USB2-F0-0003-IUSB 2.0

Overview

7USB2-F0-0003-I is a USB 2.0 90° DIP right-angle connector in KINGCONN's USB 2.0 series. It operates at 30V DC with a current rating of 1.5A per contact terminal, withstands 500 V AC at sea level, and offers contact resistance of 30 milliohms MAX and insulation resistance of 1000MEGA ohms MIN. Contacts and shell are made of copper alloy, plated with gold in the mating area and tin on the solder tails. Connectors of this type are used in desktop computers, peripherals, docking stations and embedded boards requiring a right-angle USB interface. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.

What this part is

7USB2-F0-0003-I is part of the KINGCONN USB 2.0 series (I/O Connectors). The catalogue description reads, verbatim: "USB 2.0 90° DIP Right-Angle Connector". Everything stated on this page comes from engineering drawing 7USB2-F0-0003-I, revision A, which downloads from this page.

DIP (through-hole) terminals pass through the board and solder on the far side, which gives the joint more mechanical strength.

Materials and markings as recorded on the drawing: Contact material Copper Alloy; Shell material Copper Alloy; Plating Piated Gold in Mating Area; Tin On Solder Talls. The part is marked RoHS compliant.

This model, or another one in the series?

The KINGCONN USB 2.0 series lists 5 models.

This model's own drawing states: Pitch 2.000 mm; Operating voltage 30V DC; Current rating 1.5A/contact terminal; Withstand voltage 500 V AC AT Sea Levol; Contact resistance 30 milliohms MAX; Insulation resistance 1000MEGA ohms MIN.

USB 2.0 series  USB Type-A, Type-B, Micro-B & Mini-B Receptacle Selection

Typical applications

This part belongs to the I/O Connectors group. These application pages set out the connector considerations for each:

• Connectors for Networking & Telecom Equipment
• Connectors for Payment Terminals & Kiosks

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7USB2-F0-0003-I, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7USB2-F0-0003-I connector?

It is a KINGCONN USB 2.0 series part (I/O Connectors). The catalogue description is "USB 2.0 90° DIP Right-Angle Connector", and the source drawing is 7USB2-F0-0003-I revision A.

What are the specifications of 7USB2-F0-0003-I?

From source drawing 7USB2-F0-0003-I (revision A): Pitch 2.000 mm; Operating voltage 30V DC; Current rating 1.5A/contact terminal; Withstand voltage 500 V AC AT Sea Levol; Contact resistance 30 milliohms MAX; Insulation resistance 1000MEGA ohms MIN; Contact material Copper Alloy; Shell material Copper Alloy; Plating Piated Gold in Mating Area; Tin On Solder Talls; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7USB2-F0-0003-I?

Yes. The 7USB2-F0-0003-I drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7USB2-F0-0003-I rev. A