Series
CategoryI/O Connectors
SeriesType-C
MODEL7USB31-F0-0002
DescriptionType-C 6-Pin 180° SMT Connector H6.5mm
7USB31-F0-0002 is a 180° SMT Type-C 6-pin connector in KINGCONN's Type-C series. It has a mated height of 6.5 mm, a current rating of 3A, and contact resistance of 40mΩ, with an operating temperature range of -25°C to +85°C and a durability rating of 3,000 cycles. Connectors of this type are used in I/O interfaces for consumer electronics, peripherals, and embedded systems requiring USB Type-C ports. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7USB31-F0-0002 is part of the KINGCONN Type-C series (I/O Connectors). The catalogue description reads, verbatim: "Type-C 6-Pin 180° SMT Connector H6.5mm". Everything stated on this page comes from engineering drawing 7USB31-F0-0002, revision A, which downloads from this page.
SMT means the terminals solder to the board surface, so the part goes through the same reflow pass as the rest of the surface-mount components.
The drawing marks this part RoHS compliant.
The KINGCONN Type-C series lists 10 models.
Across the series, pitches cover 0.5mm, 0.7mm and 0.85mm; durability is rated at 3,000, 5,000 or 10,000 cycles; contact counts span 14–24 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Mated height 6.5 mm; Current rating 3A; Contact resistance 40mΩ; Operating temperature -25°C~+85°C; Durability 3,000.
Type-C series USB Type-C Connector Selection: Pin Count and Durability
The engineering drawing (PDF) downloads directly from this page — drawing 7USB31-F0-0002, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Type-C series part (I/O Connectors). The catalogue description is "Type-C 6-Pin 180° SMT Connector H6.5mm", and the source drawing is 7USB31-F0-0002 revision A.
From source drawing 7USB31-F0-0002 (revision A): Mated height 6.5 mm; Current rating 3A; Contact resistance 40mΩ; Operating temperature -25°C~+85°C; Durability 3,000; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7USB31-F0-0002 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7USB31-F0-0002 rev. A