7WHTE-F0-S028Switch

Overview

7WHTE-F0-S028 is an SMT DIP switch in KINGCONN's switch series, available in 2P, 3P, 4P, 5P, 6P, 8P and 10P contact counts on a 1.27 mm pitch. It is rated for an operating temperature of -30 to +85 degrees and a storage temperature of -40 to +85 degrees, with a durability of 3000 cycles minimum. The housing is UL94 V0 rated and contacts are brass. DIP switches of this type are used on circuit boards for configuration and address setting in embedded systems and industrial equipment. The part is RoHS compliant, and the engineering drawing is available for download on this page.

What this part is

7WHTE-F0-S028 is part of the KINGCONN Switch series. The catalogue description reads, "SMT DIP Switch". Everything on this page comes from source drawing 7WHTE-F0-S028 (revision A), which can be downloaded here.

Materials and markings as recorded on the drawing: Housing material UL94 V0; Contact material Brass; UL flammability rating UL94 V0. The part is marked RoHS compliant.

This model, or another one in the series?

The KINGCONN Switch series lists 19 models.

Across the series, pitches cover 1.27mm, 2.54mm and 3mm; durability is rated at 2,000, 3,000, 10,000, 30,000, 50,000, 100,000, 200,000, 300,000 or 1,000,000 cycles; contact counts span 2–10 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Pitch 1.27 mm; Contact counts 2P, 3P, 4P, 5P, 6P, 8P, 10P; Operating temperature -30° to+85°; Storage temperature -40° to+85°; Durability 3000cycles minimum.

Switch series  Board-Level Switch Selection Guide

Typical applications

These application pages set out the connector considerations for each use case:

• Connectors for Payment Terminals & Kiosks
• Connectors for Smart Metering & IoT Terminals

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7WHTE-F0-S028, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7WHTE-F0-S028 connector?

It is a KINGCONN Switch series part. The catalogue description is "SMT DIP Switch", and the source drawing is 7WHTE-F0-S028 revision A.

What are the specifications of 7WHTE-F0-S028?

From source drawing 7WHTE-F0-S028 (revision A): Pitch 1.27 mm; Contact counts 2P, 3P, 4P, 5P, 6P, 8P, 10P; Operating temperature -30° to+85°; Storage temperature -40° to+85°; Durability 3000cycles minimum; Housing material UL94 V0; Contact material Brass; UL flammability rating UL94 V0; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7WHTE-F0-S028?

Yes. The 7WHTE-F0-S028 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7WHTE-F0-S028 rev. A