7WHTE-F0-GL67-05-LSwitch

Overview

7WHTE-F0-GL67-05-L is a 5-position DIP switch in KINGCONN's switch series, with a 2.54 mm pitch. It carries a current rating of 25mA and a withstand voltage of 500VAC/1 minute, with an operating and storage temperature range of -40 degrees C to +125 degrees C, and is rated for 2000 durability cycles. The housing is made of high temperature resistant plastic with a UL94-0 flammability rating, contacts are brass with gold plating. Switches of this type are used in circuit boards, industrial controllers and configurable electronic equipment requiring manual coding settings. The part is RoHS compliant, and the engineering drawing is available for download on this page.

What this part is

7WHTE-F0-GL67-05-L is part of the KINGCONN Switch series. The catalogue description reads, "DIP SWITCH "01234" 5POS". Everything on this page comes from source drawing 7WHTE-F0-GL67-05-L (revision B), which can be downloaded here.

DIP (through-hole) terminals pass through the board and solder on the far side, which gives the joint more mechanical strength.

Materials and markings as recorded on the drawing: Housing material HIGH TEMPERATURE RESISTANT PLASTIC, UL94 -0; Contact material Brass; Plating Gold; UL flammability rating UL94 -0. The part is marked RoHS compliant.

This model, or another one in the series?

The KINGCONN Switch series lists 19 models.

Across the series, pitches cover 1.27mm, 2.54mm and 3mm; durability is rated at 2,000, 3,000, 10,000, 30,000, 50,000, 100,000, 200,000, 300,000 or 1,000,000 cycles; contact counts span 2–10 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Pitch 2.54 mm; Contact counts 5; Current rating 25mA; Withstand voltage 500VAC/1 minute; Operating temperature -40° C~+125° C; Storage temperature -40° C~+125° C; Durability 2000.

Switch series  Board-Level Switch Selection Guide

Typical applications

These application pages set out the connector considerations for each use case:

• Connectors for Payment Terminals & Kiosks
• Connectors for Smart Metering & IoT Terminals

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7WHTE-F0-GL67-05-L, revision B — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7WHTE-F0-GL67-05-L connector?

It is a KINGCONN Switch series part. The catalogue description is "DIP SWITCH "01234" 5POS", and the source drawing is 7WHTE-F0-GL67-05-L revision B.

What are the specifications of 7WHTE-F0-GL67-05-L?

From source drawing 7WHTE-F0-GL67-05-L (revision B): Pitch 2.54 mm; Contact counts 5; Current rating 25mA; Withstand voltage 500VAC/1 minute; Operating temperature -40° C~+125° C; Storage temperature -40° C~+125° C; Durability 2000; Housing material HIGH TEMPERATURE RESISTANT PLASTIC, UL94 -0; Contact material Brass; Plating Gold; UL flammability rating UL94 -0; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7WHTE-F0-GL67-05-L?

Yes. The 7WHTE-F0-GL67-05-L drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7WHTE-F0-GL67-05-L rev. B