Series
CategoryOthers
SeriesSwitch
MODEL7WHTE-F0-3X36
DescriptionTACT SWITCH
7WHTE-F0-3X36 is a TACT SWITCH in KINGCONN's switch series, part of the Others / Switch category. It operates at 12VDC with a current rating of 50mA, withstands AC 250V (50/60Hz for 1 minute), and has a contact resistance of 100m Ω max. (initial) and insulation resistance of 100M Ω min. (at 250 VDC). The switch functions across an operating temperature range of -20°C to 70°C, is rated for 100,000 durability cycles, and uses materials with a UL94V-0 flammability rating. Switches of this type are used in control panels, handheld devices, industrial equipment and consumer electronics requiring tactile input. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7WHTE-F0-3X36 is part of the KINGCONN Switch series. The catalogue description reads, "TACT SWITCH". Everything on this page comes from source drawing 7WHTE-F0-3X36-A (revision A), which can be downloaded here.
Materials and markings as recorded on the drawing: UL flammability rating UL94V-0. The part is marked RoHS compliant.
The KINGCONN Switch series lists 19 models.
Across the series, pitches cover 1.27mm, 2.54mm and 3mm; durability is rated at 2,000, 3,000, 10,000, 30,000, 50,000, 100,000, 200,000, 300,000 or 1,000,000 cycles; contact counts span 2–10 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Operating voltage 12VCD; Current rating 50mA; Withstand voltage AC 250V (50/60Hz for 1 minute); Contact resistance 100m Ω max. (Initial); Insulation resistance 100M Ω min.(at 250 VDC); Operating temperature -20°C to 70°C; Durability 100,000.
Switch series Board-Level Switch Selection Guide
These application pages set out the connector considerations for each use case:
The engineering drawing (PDF) downloads directly from this page — drawing 7WHTE-F0-3X36-A, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Switch series part. The catalogue description is "TACT SWITCH", and the source drawing is 7WHTE-F0-3X36-A revision A.
From source drawing 7WHTE-F0-3X36-A (revision A): Operating voltage 12VCD; Current rating 50mA; Withstand voltage AC 250V (50/60Hz for 1 minute); Contact resistance 100m Ω max. (Initial); Insulation resistance 100M Ω min.(at 250 VDC); Operating temperature -20°C to 70°C; Durability 100,000; UL flammability rating UL94V-0; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7WHTE-F0-3X36-A drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7WHTE-F0-3X36-A rev. A