Series
CategoryOthers
SeriesSwitch
MODEL7WHTE-F0-3066-4.3
Description6.2X6.2XN(4.3) TACT SWITCH
7WHTE-F0-3066-4.3 is a 6.2 x 6.2 x N(4.3) tact switch in KINGCONN's switch series. It operates at DC12V with a current rating of 50mA, withstands AC250V 50Hz/1min, and has a contact resistance of ≤100mΩ Max and an insulation resistance of ≥100MΩ 100V DC/1min. The operating temperature range is -40℃ ~ +85℃ and durability is rated at 1,000,000 cycles. Switches of this type are used in keypads, control panels, consumer devices and industrial equipment requiring tactile input. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7WHTE-F0-3066-4.3 is part of the KINGCONN Switch series. The catalogue description reads, "6.2X6.2XN(4.3) TACT SWITCH". Everything on this page comes from source drawing 7WHTE-F0-3066-4.3 (revision A), which can be downloaded here.
The drawing marks this part RoHS compliant.
The KINGCONN Switch series lists 19 models.
Across the series, pitches cover 1.27mm, 2.54mm and 3mm; durability is rated at 2,000, 3,000, 10,000, 30,000, 50,000, 100,000, 200,000, 300,000 or 1,000,000 cycles; contact counts span 2–10 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Operating voltage DC12V; Current rating 50mA; Withstand voltage AC250V 50Hz/1min; Contact resistance ≤100mΩ Max; Insulation resistance ≥100MΩ 100V DC/1min; Operating temperature -40℃ ~ +85℃; Durability 1,000,000.
Switch series Board-Level Switch Selection Guide
These application pages set out the connector considerations for each use case:
The engineering drawing (PDF) downloads directly from this page — drawing 7WHTE-F0-3066-4.3, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Switch series part. The catalogue description is "6.2X6.2XN(4.3) TACT SWITCH", and the source drawing is 7WHTE-F0-3066-4.3 revision A.
From source drawing 7WHTE-F0-3066-4.3 (revision A): Operating voltage DC12V; Current rating 50mA; Withstand voltage AC250V 50Hz/1min; Contact resistance ≤100mΩ Max; Insulation resistance ≥100MΩ 100V DC/1min; Operating temperature -40℃ ~ +85℃; Durability 1,000,000; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7WHTE-F0-3066-4.3 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7WHTE-F0-3066-4.3 rev. A