Series
CategoryOthers
SeriesSwitch
MODEL7WHTE-F0-0066
DescriptionSMT Switch (Gull Wing Type)
7WHTE-F0-0066 is an SMT switch (gull wing type) in KINGCONN's switch series. It is rated for 50mA current with a withstand voltage of AC250V 50Hz/1min, contact resistance of ≤100mΩ Max, and insulation resistance of ≥100MΩ 100V DC/1min. The housing is molded from LCP, and the switch operates across -40℃ ~ +85℃ with a durability rating of 100,000 cycles Min. Switches of this type are used in compact electronic devices, consumer electronics, and control panels requiring surface-mount actuation. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7WHTE-F0-0066 is part of the KINGCONN Switch series. The catalogue description reads, "SMT Switch (Gull Wing Type)". Everything on this page comes from source drawing 7WHTE-F0-0066 (revision A), which can be downloaded here.
SMT means the terminals solder to the board surface, so the part goes through the same reflow pass as the rest of the surface-mount components.
Materials and markings as recorded on the drawing: Housing material LCP. The part is marked RoHS compliant.
The KINGCONN Switch series lists 19 models.
Across the series, pitches cover 1.27mm, 2.54mm and 3mm; durability is rated at 2,000, 3,000, 10,000, 30,000, 50,000, 100,000, 200,000, 300,000 or 1,000,000 cycles; contact counts span 2–10 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Current rating 50mA; Withstand voltage AC250V 50Hz/1min; Contact resistance ≤100mΩ Max; Insulation resistance ≥100MΩ 100V DC/1min; Operating temperature -40℃ ~ +85℃; Durability 100,000 cycles Min.
Switch series Board-Level Switch Selection Guide
These application pages set out the connector considerations for each use case:
The engineering drawing (PDF) downloads directly from this page — drawing 7WHTE-F0-0066, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Switch series part. The catalogue description is "SMT Switch (Gull Wing Type)", and the source drawing is 7WHTE-F0-0066 revision A.
From source drawing 7WHTE-F0-0066 (revision A): Current rating 50mA; Withstand voltage AC250V 50Hz/1min; Contact resistance ≤100mΩ Max; Insulation resistance ≥100MΩ 100V DC/1min; Operating temperature -40℃ ~ +85℃; Durability 100,000 cycles Min; Housing material LCP; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7WHTE-F0-0066 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7WHTE-F0-0066 rev. A