Series
CategoryOthers
SeriesSwitch
MODEL7WHTE-F0-0064
DescriptionSLIDE SWITCH
7WHTE-F0-0064 is a slide switch in KINGCONN's switch series. It is rated for an operating voltage of 4V DC and a current rating of 0.3A, with a withstand voltage of AC250V 50Hz for 1 minute. Contact resistance is ≤70mΩ, insulation resistance is >100MΩ, and the switch is rated for 10,000 cycles of durability. Slide switches of this type are used in consumer electronics, small appliances and control panels where a compact manual on-off or mode-selection function is needed. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7WHTE-F0-0064 is part of the KINGCONN Switch series. The catalogue description reads, "SLIDE SWITCH". Everything on this page comes from source drawing 7WHTE-F0-0064 (revision A), which can be downloaded here.
The drawing marks this part RoHS compliant.
The KINGCONN Switch series lists 19 models.
Across the series, pitches cover 1.27mm, 2.54mm and 3mm; durability is rated at 2,000, 3,000, 10,000, 30,000, 50,000, 100,000, 200,000, 300,000 or 1,000,000 cycles; contact counts span 2–10 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Operating voltage 4V DC; Current rating 0.3A; Withstand voltage AC250V 50Hz 1Min; Contact resistance ≤70mΩ; Insulation resistance >100MΩ; Durability 10,000 cyc.
Switch series Board-Level Switch Selection Guide
These application pages set out the connector considerations for each use case:
The engineering drawing (PDF) downloads directly from this page — drawing 7WHTE-F0-0064, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Switch series part. The catalogue description is "SLIDE SWITCH", and the source drawing is 7WHTE-F0-0064 revision A.
From source drawing 7WHTE-F0-0064 (revision A): Operating voltage 4V DC; Current rating 0.3A; Withstand voltage AC250V 50Hz 1Min; Contact resistance ≤70mΩ; Insulation resistance >100MΩ; Durability 10,000 cyc; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7WHTE-F0-0064 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7WHTE-F0-0064 rev. A