Series
CategoryOthers
SeriesSwitch
MODEL7WHTE-F0-0052
DescriptionMembrane Tact Switch
7WHTE-F0-0052 is a membrane tact switch in KINGCONN's switch series. It has a mated height of 0.55 mm, an operating voltage of DC12V, and a current rating of 50mA, with a withstand voltage of AC250V 50Hz/1min, contact resistance of ≤100mΩ Max, and insulation resistance of 100MΩ 100V DC. The housing is molded from LCP, it operates over -25°C~70°C, and it is rated for 100,000 cycles Min of durability. Switches of this type are used in control panels, handheld devices, and consumer electronics requiring low-profile tactile input. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7WHTE-F0-0052 is part of the KINGCONN Switch series. The catalogue description reads, "Membrane Tact Switch". Everything on this page comes from source drawing 7WHTE-F0-0052 (revision A), which can be downloaded here.
Materials and markings as recorded on the drawing: Housing material LCP. The part is marked RoHS compliant.
The KINGCONN Switch series lists 19 models.
Across the series, pitches cover 1.27mm, 2.54mm and 3mm; durability is rated at 2,000, 3,000, 10,000, 30,000, 50,000, 100,000, 200,000, 300,000 or 1,000,000 cycles; contact counts span 2–10 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Mated height 0.55 mm; Operating voltage DC12V; Current rating 50mA; Withstand voltage AC250V 50Hz/1min; Contact resistance ≤100mΩ Max; Insulation resistance 100MΩ 100V DC; Operating temperature -25°C~70°C; Durability 100,000 cycles Min.
Switch series Board-Level Switch Selection Guide
These application pages set out the connector considerations for each use case:
The engineering drawing (PDF) downloads directly from this page — drawing 7WHTE-F0-0052, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Switch series part. The catalogue description is "Membrane Tact Switch", and the source drawing is 7WHTE-F0-0052 revision A.
From source drawing 7WHTE-F0-0052 (revision A): Mated height 0.55 mm; Operating voltage DC12V; Current rating 50mA; Withstand voltage AC250V 50Hz/1min; Contact resistance ≤100mΩ Max; Insulation resistance 100MΩ 100V DC; Operating temperature -25°C~70°C; Durability 100,000 cycles Min; Housing material LCP; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7WHTE-F0-0052 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7WHTE-F0-0052 rev. A