Series
CategoryMemory Card Slots
SeriesSmart
MODEL7SCCN-F0-0002
DescriptionSMART CARD CONNECTOR
7SCCN-F0-0002 is a smart card connector in KINGCONN's smart-card series. It offers insulation resistance greater than 1000 MΩ at 500V DC, operates across a temperature range of -40°C to +85°C, and is rated for a minimum of 100,000 durability cycles. Connectors of this type are typically used in payment terminals, access control systems, identification card readers, and other embedded systems requiring contact smart card interfaces. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7SCCN-F0-0002 is part of the KINGCONN Smart series (Memory Card Slots). The catalogue description reads, verbatim: "SMART CARD CONNECTOR". Everything stated on this page comes from engineering drawing 7SCCN-F0-0002, revision A, which downloads from this page.
The drawing marks this part RoHS compliant.
The KINGCONN Smart series lists 5 models.
This model's own drawing states: Insulation resistance >1000MΩ/500V DC; Operating temperature -40°C~+85°C; Durability 100,000 cycles min.
Smart series Smart Card Connector Selection: 100,000-Cycle Readers
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SCCN-F0-0002, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Smart series part (Memory Card Slots). The catalogue description is "SMART CARD CONNECTOR", and the source drawing is 7SCCN-F0-0002 revision A.
From source drawing 7SCCN-F0-0002 (revision A): Insulation resistance >1000MΩ/500V DC; Operating temperature -40°C~+85°C; Durability 100,000 cycles min; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SCCN-F0-0002 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7SCCN-F0-0002 rev. A