7SDCP-B0-101XSD

Overview

7SDCP-B0-101X is a push/push type SD memory card connector in KINGCONN's SD series. It has a 2.50 mm contact pitch, with phosphor bronze contacts and a stainless shell, plated with 10u" gold over 50u" nickel in the contact area and gold flash over 50u" nickel on the solder tail. The black housing uses a UL94V-0 rated material. Connectors of this type are used in laptops, cameras, industrial controllers and other devices requiring removable SD card storage. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.

What this part is

7SDCP-B0-101X is part of the KINGCONN SD series (Memory Card Slots). The catalogue description reads, verbatim: "SD MEMORY CARD CONNECTOR (PUSH / PUSH TYPE)". Everything stated on this page comes from engineering drawing 7SDCP-B0-1010-C, revision C, which downloads from this page.

Push-push means the card latches when pushed fully in and ejects when pushed again. Unlike a hinge-type socket it needs no clearance for an ejector lever, and it gives the user a positive tactile latch.

Materials and markings as recorded on the drawing: Contact material PHOSPHOR BRONZE; Shell material STAINLESS; Plating CONTACT AREA: 10u"GOLD OVER 50u"NICKEL SOLDER TAIL:G/F OVER 50u" NICKEL; UL flammability rating UL94V-0; Housing colour BLACK. The part is marked RoHS compliant.

This model, or another one in the series?

The KINGCONN SD series lists 15 models.

Across the series, pitches cover 1mm and 2.5mm; durability is rated at 5,000 or 10,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Pitch 2.50 mm; Contact counts 9.

SD series  SD Card Connector (Socket) Selection Guide

Typical applications

This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:

• Connectors for Industrial Cameras & Imaging Systems
• Connectors for Payment Terminals & Kiosks

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7SDCP-B0-1010-C, revision C — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7SDCP-B0-101X connector?

It is a KINGCONN SD series part (Memory Card Slots). The catalogue description is "SD MEMORY CARD CONNECTOR (PUSH / PUSH TYPE)", and the source drawing is 7SDCP-B0-1010-C revision C.

What are the specifications of 7SDCP-B0-101X?

From source drawing 7SDCP-B0-1010-C (revision C): Pitch 2.50 mm; Contact counts 9; Contact material PHOSPHOR BRONZE; Shell material STAINLESS; Plating CONTACT AREA: 10u"GOLD OVER 50u"NICKEL SOLDER TAIL:G/F OVER 50u" NICKEL; UL flammability rating UL94V-0; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7SDCP-B0-101X?

Yes. The 7SDCP-B0-1010-C drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7SDCP-B0-1010-C rev. C