Series
CategoryMemory Card Slots
SeriesSD
MODEL7SDCN-FA-0013
DescriptionSD Simple Type, All Plastic, Black
7SDCN-FA-0013 is an SD Simple Type, All Plastic, Black memory card connector in KINGCONN's SD series. It carries a current rating of 0.5 amperes with a minimum insulation resistance of 1000 M Ω, and its contacts are made of copper alloy with a thickness of 0.20 mm, while the housing carries a UL 94V-0 flammability rating. Connectors of this type are used in devices that read SD memory cards, such as cameras, embedded controllers, and handheld data terminals. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7SDCN-FA-0013 is part of the KINGCONN SD series (Memory Card Slots). The catalogue description reads, verbatim: "SD Simple Type, All Plastic, Black". Everything stated on this page comes from engineering drawing 7SDCN-FA-0013, revision A, which downloads from this page.
Materials and markings as recorded on the drawing: Contact material COPPER ALLOY(T=0.20MM); UL flammability rating UL 94V-0. The part is marked RoHS compliant.
The KINGCONN SD series lists 15 models.
Across the series, pitches cover 1mm and 2.5mm; durability is rated at 5,000 or 10,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Current rating 0.5 AMPERES; Insulation resistance 1000M Ω MINIMUM.
SD series SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SDCN-FA-0013, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN SD series part (Memory Card Slots). The catalogue description is "SD Simple Type, All Plastic, Black", and the source drawing is 7SDCN-FA-0013 revision A.
From source drawing 7SDCN-FA-0013 (revision A): Current rating 0.5 AMPERES; Insulation resistance 1000M Ω MINIMUM; Contact material COPPER ALLOY(T=0.20MM); UL flammability rating UL 94V-0; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SDCN-FA-0013 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7SDCN-FA-0013 rev. A