7SDCN-F0-1012SD

Overview

7SDCN-F0-1012 (SD PUSH H:2.85mm) is a push-type SD memory card connector in KINGCONN's SD series. It has a mated height of 2.85 mm, suited to board designs where this vertical clearance is available. Connectors of this type are used in embedded systems, industrial cameras, data loggers and handheld devices that read removable SD storage. The part is RoHS compliant, and the engineering drawing is available for download on this page.

What this part is

7SDCN-F0-1012 is part of the KINGCONN SD series (Memory Card Slots). The catalogue description reads, verbatim: "SD PUSH H:2.85mm". Everything stated on this page comes from engineering drawing 7SDCN-F0-1012, revision A, which downloads from this page.

The drawing marks this part RoHS compliant.

This model, or another one in the series?

The KINGCONN SD series lists 15 models.

Across the series, pitches cover 1mm and 2.5mm; durability is rated at 5,000 or 10,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Mated height 2.85 mm.

SD series  SD Card Connector (Socket) Selection Guide

Typical applications

This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:

• Connectors for Industrial Cameras & Imaging Systems
• Connectors for Payment Terminals & Kiosks

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7SDCN-F0-1012, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7SDCN-F0-1012 connector?

It is a KINGCONN SD series part (Memory Card Slots). The catalogue description is "SD PUSH H:2.85mm", and the source drawing is 7SDCN-F0-1012 revision A.

What are the specifications of 7SDCN-F0-1012?

From source drawing 7SDCN-F0-1012 (revision A): Mated height 2.85 mm; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7SDCN-F0-1012?

Yes. The 7SDCN-F0-1012 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7SDCN-F0-1012 rev. A