Series
CategoryMemory Card Slots
SeriesSD
MODEL7SDCN-F0-0037
DescriptionSD PUSH H:2.7
7SDCN-F0-0037 (SD PUSH H:2.7) is a push-type SD memory card connector in KINGCONN's SD series. It operates at 3.3V with a current rating of 0.5A MAX., contact resistance of 100 mOHMS MAX., and withstand voltage of 500V AC for 1 minute, and is rated for 10000 CYCLES of durability. It functions across an operating temperature range of -25°C~85°C and storage temperature of -40°C~85°C, with a black LCP housing, PH/BR contacts, and a SUS304 shell. Connectors of this type are used in embedded systems, cameras, and handheld devices that read SD storage media. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7SDCN-F0-0037 is part of the KINGCONN SD series (Memory Card Slots). The catalogue description reads, verbatim: "SD PUSH H:2.7". Everything stated on this page comes from engineering drawing 7SDCN-F0-0037, revision A, which downloads from this page.
Materials and markings as recorded on the drawing: Housing material LCP; Contact material PH/BR; Shell material SUS304; Housing colour BLACK. The part is marked RoHS compliant.
The KINGCONN SD series lists 15 models.
Across the series, pitches cover 1mm and 2.5mm; durability is rated at 5,000 or 10,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Operating voltage 3.3V; Current rating 0.5A MAX; Withstand voltage 500V AC 1 MINUTE; Contact resistance 100 mOHMS MAX; Operating temperature -25°C~85°C; Storage temperature -40°C~85°C; Durability 10000 CYCLES.
SD series SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SDCN-F0-0037, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN SD series part (Memory Card Slots). The catalogue description is "SD PUSH H:2.7", and the source drawing is 7SDCN-F0-0037 revision A.
From source drawing 7SDCN-F0-0037 (revision A): Operating voltage 3.3V; Current rating 0.5A MAX; Withstand voltage 500V AC 1 MINUTE; Contact resistance 100 mOHMS MAX; Operating temperature -25°C~85°C; Storage temperature -40°C~85°C; Durability 10000 CYCLES; Housing material LCP; Contact material PH/BR; Shell material SUS304; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SDCN-F0-0037 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7SDCN-F0-0037 rev. A