Series
CategoryMemory Card Slots
SeriesSD
MODEL7SDCN-F0-0026
DescriptionSD CONN REVERSE TYPE PUSH PUSH
7SDCN-F0-0026 is a reverse-type push-push SD memory card connector in KINGCONN's SD series. It is rated for 0.5 A current with a withstand voltage of 500V AC, contact resistance of 100 mΩ Max., and insulation resistance of 1000MΩ Min. at 100V DC, and it is rated for 10,000 durability cycles. The housing is SYNTHETIC RESIN in black, the shell is STAINLESS T=0.2, and the hold-down is COPPER ALLOY T=0.20. Connectors of this type are used in embedded systems, industrial devices, data loggers and handheld equipment that read SD storage cards. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7SDCN-F0-0026 is part of the KINGCONN SD series (Memory Card Slots). The catalogue description reads, verbatim: "SD CONN REVERSE TYPE PUSH PUSH". Everything stated on this page comes from engineering drawing 7SDCN-F0-0026, revision A, which downloads from this page.
Push-push means the card latches when pushed fully in and ejects when pushed again. Unlike a hinge-type socket it needs no clearance for an ejector lever, and it gives the user a positive tactile latch.
Materials and markings as recorded on the drawing: Housing material SYNTHETIC RESIN; Shell material STAINLESS T=0.2; Hold-down material COPPER ALLOY T=0.20; Housing colour BLACK. The part is marked RoHS compliant.
The KINGCONN SD series lists 15 models.
Across the series, pitches cover 1mm and 2.5mm; durability is rated at 5,000 or 10,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Current rating 0.5 A; Withstand voltage 500V AC; Contact resistance 100 mΩ Max; Insulation resistance 1000MΩ Min. at 100V DC; Durability 10,000 times.
SD series SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SDCN-F0-0026, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN SD series part (Memory Card Slots). The catalogue description is "SD CONN REVERSE TYPE PUSH PUSH", and the source drawing is 7SDCN-F0-0026 revision A.
From source drawing 7SDCN-F0-0026 (revision A): Current rating 0.5 A; Withstand voltage 500V AC; Contact resistance 100 mΩ Max; Insulation resistance 1000MΩ Min. at 100V DC; Durability 10,000 times; Housing material SYNTHETIC RESIN; Shell material STAINLESS T=0.2; Hold-down material COPPER ALLOY T=0.20; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SDCN-F0-0026 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7SDCN-F0-0026 rev. A