7SATA-X0-1002SATA

Overview

7SATA-X0-1002 is a SATA 7+15-pin male right-angle clip-on connector with a 1.0mm pitch in KINGCONN's SATA series. The housing is molded from LCP E130i 30% glass-filled material rated UL 94V-0, and the contacts are BRASS C2680R EH with a thickness of 0.25mm, plated with gold and tin over a nickel underplating, with tin plating of 50u" minimum on the solder tails. The housing is black. Connectors of this type are used to link hard disk drives, solid-state drives and optical drives to motherboards in desktop and laptop computers and servers. The part is RoHS compliant, and the engineering drawing is available for download on this page.

What this part is

7SATA-X0-1002 is part of the KINGCONN SATA series (I/O Connectors). The catalogue description reads, verbatim: "SATA 7+15-Pin Male Right-Angle Clip-On Connector, 1.0mm". Everything stated on this page comes from engineering drawing 7SATA-X0-1002, revision A, which downloads from this page.

A right-angle receptacle mates parallel to the board, with the opening facing out from the board edge.

Materials and markings as recorded on the drawing: Housing material LCP E130i 30% G/F UL 94V-0; Contact material BRASS C2680R EH,T=0.25mm; Plating (1u" 3u" 5u" 15u" )GOLD/TIN PLATING ON CONTACT AREA 100u" MIN. TIN PLATING ON SOLDERTAILS 50u" MIN.NICKEL UNDERPLATING OVER ALL; UL flammability rating UL 94V-0; Housing colour BLACK. The part is marked RoHS compliant.

This model, or another one in the series?

The KINGCONN SATA series lists 9 models.

Across the series, mated heights cover 3.5mm and 4.2mm — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Pitch 1.27 mm.

SATA series  RJ45, HDMI, D-Sub and SATA Connector Selection Guide

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7SATA-X0-1002, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7SATA-X0-1002 connector?

It is a KINGCONN SATA series part (I/O Connectors). The catalogue description is "SATA 7+15-Pin Male Right-Angle Clip-On Connector, 1.0mm", and the source drawing is 7SATA-X0-1002 revision A.

What are the specifications of 7SATA-X0-1002?

From source drawing 7SATA-X0-1002 (revision A): Pitch 1.27 mm; Housing material LCP E130i 30% G/F UL 94V-0; Contact material BRASS C2680R EH,T=0.25mm; Plating (1u" 3u" 5u" 15u" )GOLD/TIN PLATING ON CONTACT AREA 100u" MIN. TIN PLATING ON SOLDERTAILS 50u" MIN.NICKEL UNDERPLATING OVER ALL; UL flammability rating UL 94V-0; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7SATA-X0-1002?

Yes. The 7SATA-X0-1002 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7SATA-X0-1002 rev. A