7SATA-F0-0015SATA

Overview

7SATA-F0-0015 is a SATA 7+15-pin vertical SMT connector with a grounding tab in KINGCONN's SATA series. The housing is molded from LCP 30% G/F rated UL 94V-0, with phosphor bronze C5191R-H contacts 0.25 mm thick and a brass C2680R-H hold-down 0.20 mm thick, plated with 1u" gold/tin on the contact area, 100u" min. tin on soldertails, and nickel underplating overall, in a black housing. Connectors of this type are used to link storage drives such as hard disk drives and solid state drives to host boards in desktops, servers and storage enclosures. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.

What this part is

7SATA-F0-0015 is part of the KINGCONN SATA series (I/O Connectors). The catalogue description reads, verbatim: "SATA 7+15-Pin Vertical SMT Connector with Grounding Tab". Everything stated on this page comes from engineering drawing 7SATA-F0-0015, revision A, which downloads from this page.

SMT means the terminals solder to the board surface, so the part goes through the same reflow pass as the rest of the surface-mount components.

Materials and markings as recorded on the drawing: Housing material LCP 30% G/F UL 94V-0; Contact material PHOSPHOR BRONZE C5191R-H,T=0.25mm; Hold-down material BRASS C2680R-H,T=0.20mm; Plating 1u" GOLD/TIN PLATING ON CONTACT AREA 100u"MIN. TIN PLATING ON SOLDERTAILS 50u" MIN.NICKEL UNDERPLATING OVER ALL; UL flammability rating UL 94V-0; Housing colour BLACK. The part is marked RoHS compliant.

This model, or another one in the series?

The KINGCONN SATA series lists 9 models.

Across the series, mated heights cover 3.5mm and 4.2mm — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Pitch 1.27 mm.

SATA series  RJ45, HDMI, D-Sub and SATA Connector Selection Guide

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7SATA-F0-0015, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7SATA-F0-0015 connector?

It is a KINGCONN SATA series part (I/O Connectors). The catalogue description is "SATA 7+15-Pin Vertical SMT Connector with Grounding Tab", and the source drawing is 7SATA-F0-0015 revision A.

What are the specifications of 7SATA-F0-0015?

From source drawing 7SATA-F0-0015 (revision A): Pitch 1.27 mm; Housing material LCP 30% G/F UL 94V-0; Contact material PHOSPHOR BRONZE C5191R-H,T=0.25mm; Hold-down material BRASS C2680R-H,T=0.20mm; Plating 1u" GOLD/TIN PLATING ON CONTACT AREA 100u"MIN. TIN PLATING ON SOLDERTAILS 50u" MIN.NICKEL UNDERPLATING OVER ALL; UL flammability rating UL 94V-0; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7SATA-F0-0015?

Yes. The 7SATA-F0-0015 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7SATA-F0-0015 rev. A