Series
CategoryMemory Card Slots
SeriesNANO SIM
MODEL7SIMC-F0-0043
DescriptionNano SIM Card Push Socket 7-Pin 1.37H with CD Pin
7SIMC-F0-0043 is a 7-pin Nano SIM card push-type socket with CD pin in KINGCONN's nano-sim series. It has a mated height of 1.37 mm, an operating voltage of 30V, and a current rating of 0.5A, with withstand voltage of 500V DC for 1 minute, contact resistance of 100mΩ max, and insulation resistance of 1000MΩ min. The housing is high temperature thermoplastic, contacts are copper alloy, and the shell is stainless steel. Connectors of this type are used in mobile devices, IoT modules, and other equipment requiring removable SIM card interfaces. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7SIMC-F0-0043 is part of the KINGCONN NANO SIM series (Memory Card Slots). The catalogue description reads, verbatim: "Nano SIM Card Push Socket 7-Pin 1.37H with CD Pin". Everything stated on this page comes from engineering drawing 7SIMC-F0-0043-C, revision C, which downloads from this page.
Materials and markings as recorded on the drawing: Housing material High Temperature Thermoplastic; Contact material Copper Alloy; Shell material Stainless Steel. The part is marked RoHS compliant.
The KINGCONN NANO SIM series lists 7 models.
Across the series, mated heights cover 1.25mm, 1.35mm, 1.37mm and 1.4mm; durability is rated at 3,000 or 5,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Mated height 1.37 mm; Contact counts 7; Operating voltage 30V; Current rating 0.5A; Withstand voltage 500V DC For 1 Minutes; Contact resistance 100mΩ Max; Insulation resistance 1000MΩ Min.
NANO SIM series SIM Card Connector: Nano SIM, Micro SIM & Mini SIM Sockets
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SIMC-F0-0043-C, revision C — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN NANO SIM series part (Memory Card Slots). The catalogue description is "Nano SIM Card Push Socket 7-Pin 1.37H with CD Pin", and the source drawing is 7SIMC-F0-0043-C revision C.
From source drawing 7SIMC-F0-0043-C (revision C): Mated height 1.37 mm; Contact counts 7; Operating voltage 30V; Current rating 0.5A; Withstand voltage 500V DC For 1 Minutes; Contact resistance 100mΩ Max; Insulation resistance 1000MΩ Min; Housing material High Temperature Thermoplastic; Contact material Copper Alloy; Shell material Stainless Steel; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SIMC-F0-0043-C drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7SIMC-F0-0043-C rev. C