Series
CategoryMemory Card Slots
SeriesNANO SIM
MODEL7SIMC-F0-0030
DescriptionNano SIM Card Socket Non-Push H1.35
7SIMC-F0-0030 is a non-push Nano SIM card socket in KINGCONN's nano-sim series, with a mated height of 1.35 mm. It operates at 125V AC/DC with a contact resistance of 100mΩ max. and insulation resistance of 1000MΩ min. at 500VDC, across an operating temperature range of -20°C to +60°C and storage temperature of -40°C to +70°C. Contacts are C5210 with a SUS shell, and the housing carries a UL 94V-0 flammability rating. This connector type is used in mobile phones, tablets, and other portable devices requiring compact SIM card interfaces. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7SIMC-F0-0030 is part of the KINGCONN NANO SIM series (Memory Card Slots). The catalogue description reads, verbatim: "Nano SIM Card Socket Non-Push H1.35". Everything stated on this page comes from engineering drawing 7SIMC-F0-0030, revision A, which downloads from this page.
A no-push socket has no ejection mechanism: the card mates when pushed fully home and is pulled straight out. It is the lowest part-count option.
Materials and markings as recorded on the drawing: Contact material C5210; Shell material SUS; UL flammability rating UL 94V-0. The part is marked RoHS compliant.
The KINGCONN NANO SIM series lists 7 models.
Across the series, mated heights cover 1.25mm, 1.35mm, 1.37mm and 1.4mm; durability is rated at 3,000 or 5,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Mated height 1.35 mm; Operating voltage 125V AC/DC; Contact resistance 100mΩmax; Insulation resistance 1000MΩmin. /500VDC; Operating temperature -20° C~+60° C; Storage temperature -40° C~+70° C; Durability 3,000.
NANO SIM series SIM Card Connector: Nano SIM, Micro SIM & Mini SIM Sockets
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SIMC-F0-0030, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN NANO SIM series part (Memory Card Slots). The catalogue description is "Nano SIM Card Socket Non-Push H1.35", and the source drawing is 7SIMC-F0-0030 revision A.
From source drawing 7SIMC-F0-0030 (revision A): Mated height 1.35 mm; Operating voltage 125V AC/DC; Contact resistance 100mΩmax; Insulation resistance 1000MΩmin. /500VDC; Operating temperature -20° C~+60° C; Storage temperature -40° C~+70° C; Durability 3,000; Contact material C5210; Shell material SUS; UL flammability rating UL 94V-0; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SIMC-F0-0030 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7SIMC-F0-0030 rev. A