Series
CategoryMemory Card Slots
SeriesMini SIM
MODEL7SIMC-FA-0013
DescriptionSIM card 6pin H:1.8mm
7SIMC-FA-0013 is a 6-pin mini SIM card connector in KINGCONN's mini-sim series, with a mated height of 1.8 mm. It carries a current rating of 1A at an operating voltage of 50V, withstands 250V AC, and offers insulation resistance of 1000MEG.OHM MIN, with an operating temperature range of -20°C to +85°C. Connectors of this type are used in mobile handsets, IoT modules, and embedded systems that require a SIM card interface. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7SIMC-FA-0013 is part of the KINGCONN Mini SIM series (Memory Card Slots). The catalogue description reads, verbatim: "SIM card 6pin H:1.8mm". Everything stated on this page comes from engineering drawing 7SIMC-FA-0013-A, revision A, which downloads from this page.
The drawing marks this part RoHS compliant.
The KINGCONN Mini SIM series lists 5 models.
Across the series, pitches cover 1.27mm and 2.54mm; durability is rated at 3,000 or 5,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Pitch 2.54 mm; Mated height 1.8 mm; Contact counts 6; Operating voltage 50V; Current rating 1A; Withstand voltage 250V AC; Insulation resistance 1000MEG.OHM MIN; Operating temperature -20° TO +85°; Durability 3000.
Mini SIM series SIM Card Connector: Nano SIM, Micro SIM & Mini SIM Sockets
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SIMC-FA-0013-A, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Mini SIM series part (Memory Card Slots). The catalogue description is "SIM card 6pin H:1.8mm", and the source drawing is 7SIMC-FA-0013-A revision A.
From source drawing 7SIMC-FA-0013-A (revision A): Pitch 2.54 mm; Mated height 1.8 mm; Contact counts 6; Operating voltage 50V; Current rating 1A; Withstand voltage 250V AC; Insulation resistance 1000MEG.OHM MIN; Operating temperature -20° TO +85°; Durability 3000; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SIMC-FA-0013-A drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7SIMC-FA-0013-A rev. A