Series
CategoryMemory Card Slots
SeriesMini SIM
MODEL7SIMC-FA-0006
DescriptionSIM CARD PUSH PUS(6+2PIN) H=1.8mm
7SIMC-FA-0006 is a push-type Mini SIM card connector (6+2 pin) in KINGCONN's mini-sim series. It has a mated height of 1.8 mm, a current rating of 0.5A, and a withstand voltage of AC500V r.m.s., with insulation resistance of 1000 Megohms minimum at DC 500V and an operating temperature range of -40°C to +85°C. The housing is HI-Temp plastic rated UL 94V-0, with copper alloy contacts and a SUS shell. Connectors of this type are used in mobile phones, IoT modules, and other devices requiring SIM card access. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7SIMC-FA-0006 is part of the KINGCONN Mini SIM series (Memory Card Slots). The catalogue description reads, verbatim: "SIM CARD PUSH PUS(6+2PIN) H=1.8mm". Everything stated on this page comes from engineering drawing 7SIMC-FA-0006, revision A, which downloads from this page.
Push-push means the card latches when pushed fully in and ejects when pushed again. Unlike a hinge-type socket it needs no clearance for an ejector lever, and it gives the user a positive tactile latch.
Materials and markings as recorded on the drawing: Housing material HI-Temp plastic UL 94V-0 Rated; Contact material Copper Alloy; Shell material SUS; UL flammability rating UL 94V-0. The part is marked RoHS compliant.
The KINGCONN Mini SIM series lists 5 models.
Across the series, pitches cover 1.27mm and 2.54mm; durability is rated at 3,000 or 5,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Mated height 1.8 mm; Current rating 0.5A; Withstand voltage AC500V r.m.s; Insulation resistance 1000Megohms Minimum at DC 500V; Operating temperature -40°To+85°; Durability 5000.
Mini SIM series SIM Card Connector: Nano SIM, Micro SIM & Mini SIM Sockets
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SIMC-FA-0006, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Mini SIM series part (Memory Card Slots). The catalogue description is "SIM CARD PUSH PUS(6+2PIN) H=1.8mm", and the source drawing is 7SIMC-FA-0006 revision A.
From source drawing 7SIMC-FA-0006 (revision A): Mated height 1.8 mm; Current rating 0.5A; Withstand voltage AC500V r.m.s; Insulation resistance 1000Megohms Minimum at DC 500V; Operating temperature -40°To+85°; Durability 5000; Housing material HI-Temp plastic UL 94V-0 Rated; Contact material Copper Alloy; Shell material SUS; UL flammability rating UL 94V-0; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SIMC-FA-0006 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7SIMC-FA-0006 rev. A