7SIMC-FA-0005Mini SIM

Overview

7SIMC-FA-0005 is a push-type SIM card connector, model SIM PUSH 8+1 without positioning posts, part of KINGCONN's mini-SIM series. It has a pitch of 1.27 mm, defining the spacing between its contact terminals for board layout purposes. Connectors of this type are used in mobile devices, IoT modules, embedded systems and telecom equipment that require SIM card interfaces. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.

What this part is

7SIMC-FA-0005 is part of the KINGCONN Mini SIM series (Memory Card Slots). The catalogue description reads, verbatim: "SIM PUSH 8+1 without positioning posts". Everything stated on this page comes from engineering drawing 7SIMC-FA-0005-A, revision A, which downloads from this page.

The drawing marks this part RoHS compliant.

This model, or another one in the series?

The KINGCONN Mini SIM series lists 5 models.

Across the series, pitches cover 1.27mm and 2.54mm; durability is rated at 3,000 or 5,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Pitch 1.27 mm.

Mini SIM series  SIM Card Connector: Nano SIM, Micro SIM & Mini SIM Sockets

Typical applications

This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:

• Connectors for Networking & Telecom Equipment

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7SIMC-FA-0005-A, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7SIMC-FA-0005 connector?

It is a KINGCONN Mini SIM series part (Memory Card Slots). The catalogue description is "SIM PUSH 8+1 without positioning posts", and the source drawing is 7SIMC-FA-0005-A revision A.

What are the specifications of 7SIMC-FA-0005?

From source drawing 7SIMC-FA-0005-A (revision A): Pitch 1.27 mm; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7SIMC-FA-0005?

Yes. The 7SIMC-FA-0005-A drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7SIMC-FA-0005-A rev. A