Series
CategoryMemory Card Slots
SeriesMini SIM
MODEL7SIMC-AA-0008
DescriptionPush-Push SIM Card Socket, Top-Insert Drawer, 6+2 Pin
7SIMC-AA-0008 is a Push-Push SIM Card Socket with a top-insert drawer and 6+2 pin, 8-contact layout, part of KINGCONN's mini-SIM series. It offers contact resistance of ≤ 0.1 Ω, insulation resistance of ≥ 1000 MΩ, and an operating temperature range of -40 ℃ ~ +85 ℃, with a durability rating of 5000 cycles. The housing is molded in LCP with phosphor bronze contacts. Connectors of this type are used in mobile handsets, IoT modules, POS terminals and other devices requiring removable SIM card access. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7SIMC-AA-0008 is part of the KINGCONN Mini SIM series (Memory Card Slots). The catalogue description reads, verbatim: "Push-Push SIM Card Socket, Top-Insert Drawer, 6+2 Pin". Everything stated on this page comes from engineering drawing 7SIMC-AA-0008, revision B, which downloads from this page.
Push-push means the card latches when pushed fully in and ejects when pushed again. Unlike a hinge-type socket it needs no clearance for an ejector lever, and it gives the user a positive tactile latch.
Materials and markings as recorded on the drawing: Housing material LCP; Contact material Phosphor bronze. The part is marked RoHS compliant.
The KINGCONN Mini SIM series lists 5 models.
Across the series, pitches cover 1.27mm and 2.54mm; durability is rated at 3,000 or 5,000 cycles — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Contact counts 8; Contact resistance ≤ 0.1 Ω; Insulation resistance ≥ 1000 MΩ; Operating temperature -40 ℃ ~ + 85 ℃; Durability 5000.
Mini SIM series SIM Card Connector: Nano SIM, Micro SIM & Mini SIM Sockets
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7SIMC-AA-0008, revision B — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Mini SIM series part (Memory Card Slots). The catalogue description is "Push-Push SIM Card Socket, Top-Insert Drawer, 6+2 Pin", and the source drawing is 7SIMC-AA-0008 revision B.
From source drawing 7SIMC-AA-0008 (revision B): Contact counts 8; Contact resistance ≤ 0.1 Ω; Insulation resistance ≥ 1000 MΩ; Operating temperature -40 ℃ ~ + 85 ℃; Durability 5000; Housing material LCP; Contact material Phosphor bronze; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7SIMC-AA-0008 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7SIMC-AA-0008 rev. B