Series
CategoryMemory Card Slots
SeriesMicro SD ( T-Flash )
MODEL7TFCN-FA-1010-X
DescriptionTF Short Body with Detect Pin
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
Memory Card Slots · Micro SD ( T-Flash )
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
7TFCN-FA-1010-X is a TF short body Micro SD (T-Flash) memory card connector with detect pin, part of KINGCONN's micro-sd series. It has 8 contacts, a withstand voltage of 500V RMS, contact resistance of 50m ohms max, and insulation resistance of 1000M ohms min, and operates over a temperature range of -25° to +85°. The shell is SPCC with contact areas gold plated over nickel, solder tail areas tin plated, and housing in black; contacts are gold plated over nickel with tin plating overall. Connectors of this type are used in embedded controllers, industrial cameras, data loggers and handheld devices that read removable storage. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7TFCN-FA-1010-X is part of the KINGCONN Micro SD ( T-Flash ) series (Memory Card Slots). The catalogue description reads, verbatim: "TF Short Body with Detect Pin". Everything stated on this page comes from engineering drawing 7TFCN-FA-1010-X, revision A, which downloads from this page.
Materials and markings as recorded on the drawing: Shell material SPCC; Plating GOLD Plated Over NICKEL Contact area,TIN ON SOLDER TAIL AREA& TIN Plated ALL Over NICKEL; Housing colour BLACK. The part is marked RoHS compliant.
The KINGCONN Micro SD ( T-Flash ) series lists 19 models.
Across the series, mated heights cover 1.15mm, 1.28mm, 1.29mm, 1.45mm, 1.5mm and 1.68mm; pitches cover 0.7mm, 0.9mm and 1.1mm; durability is rated at 3,000, 5,000 or 10,000 cycles; contact counts span 8–11 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Contact counts 8; Withstand voltage 500V RMS; Contact resistance 50m ohms max; Insulation resistance 1000M ohms min; Operating temperature -25°to+85°.
Micro SD ( T-Flash ) series Micro SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7TFCN-FA-1010-X, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Micro SD ( T-Flash ) series part (Memory Card Slots). The catalogue description is "TF Short Body with Detect Pin", and the source drawing is 7TFCN-FA-1010-X revision A.
From source drawing 7TFCN-FA-1010-X (revision A): Contact counts 8; Withstand voltage 500V RMS; Contact resistance 50m ohms max; Insulation resistance 1000M ohms min; Operating temperature -25°to+85°; Shell material SPCC; Plating GOLD Plated Over NICKEL Contact area,TIN ON SOLDER TAIL AREA& TIN Plated ALL Over NICKEL; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7TFCN-FA-1010-X drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7TFCN-FA-1010-X rev. A