Series
CategoryMemory Card Slots
SeriesMicro SD ( T-Flash )
MODEL7TFCN-F0-0018
DescriptionMICRO SD CONN H:1.28mm
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
Memory Card Slots · Micro SD ( T-Flash )
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
7TFCN-F0-0018 is a Micro SD (T-Flash) memory card connector in KINGCONN's micro-sd series, with 10 contact counts and a mated height of 1.28 mm. It carries a current rating of 0.5 A Max., withstand voltage of 500V(AC) for 1 min., contact resistance of 100mΩ Max., insulation resistance of 100MΩ Min., and an operating temperature range of -25°C~+65°C. Housing is high temperature resistant plastic rated UL94 V-0, with copper alloy contacts and a stainless steel shell. Connectors of this type are used in embedded systems, industrial cameras, data loggers and handheld devices that read removable storage. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7TFCN-F0-0018 is part of the KINGCONN Micro SD ( T-Flash ) series (Memory Card Slots). The catalogue description reads, verbatim: "MICRO SD CONN H:1.28mm". Everything stated on this page comes from engineering drawing 7TFCN-F0-0018, revision A, which downloads from this page.
Materials and markings as recorded on the drawing: Housing material HIGH TEMPER ATURE RESISTANT PLASTIC,UL94 V-0; Contact material COPP ALLOY; Shell material STAINLESS STEEL; UL flammability rating UL94 V-0. The part is marked RoHS compliant.
The KINGCONN Micro SD ( T-Flash ) series lists 19 models.
Across the series, mated heights cover 1.15mm, 1.28mm, 1.29mm, 1.45mm, 1.5mm and 1.68mm; pitches cover 0.7mm, 0.9mm and 1.1mm; durability is rated at 3,000, 5,000 or 10,000 cycles; contact counts span 8–11 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Mated height 1.28 mm; Contact counts 10; Current rating 0.5 A Max; Withstand voltage 500V(AC) for 1 min; Contact resistance 100mΩ Max; Insulation resistance 100MΩ Min; Operating temperature -25°C~+65°C; Durability 3000.
Micro SD ( T-Flash ) series Micro SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7TFCN-F0-0018, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Micro SD ( T-Flash ) series part (Memory Card Slots). The catalogue description is "MICRO SD CONN H:1.28mm", and the source drawing is 7TFCN-F0-0018 revision A.
From source drawing 7TFCN-F0-0018 (revision A): Mated height 1.28 mm; Contact counts 10; Current rating 0.5 A Max; Withstand voltage 500V(AC) for 1 min; Contact resistance 100mΩ Max; Insulation resistance 100MΩ Min; Operating temperature -25°C~+65°C; Durability 3000; Housing material HIGH TEMPER ATURE RESISTANT PLASTIC,UL94 V-0; Contact material COPP ALLOY; Shell material STAINLESS STEEL; UL flammability rating UL94 V-0; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7TFCN-F0-0018 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7TFCN-F0-0018 rev. A