Series
CategoryMemory Card Slots
SeriesMicro SD ( T-Flash )
MODEL7MSDP-FA-0024
DescriptionMICRO SD 1.28H PUSH SMT
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
Memory Card Slots · Micro SD ( T-Flash )
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
7MSDP-FA-0024 is a push-type Micro SD (T-Flash) memory card connector in KINGCONN's micro-sd series, with a low-profile 1.28 mm mated height. It has a 1.10 mm pitch, suiting boards where space is constrained. Connectors of this type are used in embedded systems, industrial cameras, data loggers and handheld devices that read removable storage media. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7MSDP-FA-0024 is part of the KINGCONN Micro SD ( T-Flash ) series (Memory Card Slots). The catalogue description reads, verbatim: "MICRO SD 1.28H PUSH SMT". Everything stated on this page comes from engineering drawing 7MSDP-FA-0024, revision A, which downloads from this page.
SMT means the terminals solder to the board surface, so the part goes through the same reflow pass as the rest of the surface-mount components.
The drawing marks this part RoHS compliant.
The KINGCONN Micro SD ( T-Flash ) series lists 19 models.
Across the series, mated heights cover 1.15mm, 1.28mm, 1.29mm, 1.45mm, 1.5mm and 1.68mm; pitches cover 0.7mm, 0.9mm and 1.1mm; durability is rated at 3,000, 5,000 or 10,000 cycles; contact counts span 8–11 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Pitch 1.10 mm; Durability 5000.
Micro SD ( T-Flash ) series Micro SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7MSDP-FA-0024, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Micro SD ( T-Flash ) series part (Memory Card Slots). The catalogue description is "MICRO SD 1.28H PUSH SMT", and the source drawing is 7MSDP-FA-0024 revision A.
From source drawing 7MSDP-FA-0024 (revision A): Pitch 1.10 mm; Durability 5000; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7MSDP-FA-0024 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7MSDP-FA-0024 rev. A