Series
CategoryMemory Card Slots
SeriesMicro SD ( T-Flash )
MODEL7MSDP-F0-0036
DescriptionMicro SD H1.45mm Push-Push Card Socket
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
Memory Card Slots · Micro SD ( T-Flash )
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
7MSDP-F0-0036 is a push-push type Micro SD (T-Flash) memory card socket in KINGCONN's micro-sd series. It has a mated height of 1.45 mm, an operating voltage of 100V AC(rms)/DC, and a current rating of 0.5 A, with withstand voltage of 500 VAC/1 minute and contact resistance of 100 m ohms max. The housing is LCP rated UL94 V-0 in black, contacts are copper alloy, and the shell is stainless steel, with an operating temperature range of -25°C to +85°C. Connectors of this type are used in embedded systems, handheld devices, and industrial equipment requiring removable storage. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7MSDP-F0-0036 is part of the KINGCONN Micro SD ( T-Flash ) series (Memory Card Slots). The catalogue description reads, verbatim: "Micro SD H1.45mm Push-Push Card Socket". Everything stated on this page comes from engineering drawing 7MSDP-F0-0036, revision A, which downloads from this page.
Push-push means the card latches when pushed fully in and ejects when pushed again. Unlike a hinge-type socket it needs no clearance for an ejector lever, and it gives the user a positive tactile latch.
Materials and markings as recorded on the drawing: Housing material LCP UL94 V-0, BLACK COLOR; Contact material COPPER ALLOY; Shell material STAINLESS STEEL SUS; UL flammability rating UL94 V-0; Housing colour BLACK. The part is marked RoHS compliant.
The KINGCONN Micro SD ( T-Flash ) series lists 19 models.
Across the series, mated heights cover 1.15mm, 1.28mm, 1.29mm, 1.45mm, 1.5mm and 1.68mm; pitches cover 0.7mm, 0.9mm and 1.1mm; durability is rated at 3,000, 5,000 or 10,000 cycles; contact counts span 8–11 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Mated height 1.45 mm; Operating voltage 100V AC(rms)/DC; Current rating 0.5 A; Withstand voltage 500 VAC/1MINUTE; Contact resistance 100 m OHMS MAX; Insulation resistance 1000M OHMS MIN. AT 250VDC; Operating temperature -25°C~+85°C.
Micro SD ( T-Flash ) series Micro SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7MSDP-F0-0036, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Micro SD ( T-Flash ) series part (Memory Card Slots). The catalogue description is "Micro SD H1.45mm Push-Push Card Socket", and the source drawing is 7MSDP-F0-0036 revision A.
From source drawing 7MSDP-F0-0036 (revision A): Mated height 1.45 mm; Operating voltage 100V AC(rms)/DC; Current rating 0.5 A; Withstand voltage 500 VAC/1MINUTE; Contact resistance 100 m OHMS MAX; Insulation resistance 1000M OHMS MIN. AT 250VDC; Operating temperature -25°C~+85°C; Housing material LCP UL94 V-0, BLACK COLOR; Contact material COPPER ALLOY; Shell material STAINLESS STEEL SUS; UL flammability rating UL94 V-0; Housing colour BLACK; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7MSDP-F0-0036 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7MSDP-F0-0036 rev. A