Series
CategoryMemory Card Slots
SeriesMicro SD ( T-Flash )
MODEL7MSDP-BA-1016
DescriptionMicro SD PUSH 10u"
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
Memory Card Slots · Micro SD ( T-Flash )
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
7MSDP-BA-1016 (Micro SD PUSH 10u") is a push-type Micro SD (T-Flash) memory card connector in KINGCONN's micro-sd series. It is rated for an operating voltage of 100V DC Max., a current rating of 0.5A DC Max., withstand voltage of 500V AC, contact resistance of 100mΩ Max., and insulation resistance of 100MΩ Min., with an operating temperature range of -25°C to +85°C and a durability of 10000 cycles. Contacts are Copper Alloy C5210R, the black housing carries a UL 94V-0 flammability rating, and this connector type is used in embedded controllers, industrial cameras, data loggers and handheld devices that read removable storage. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7MSDP-BA-1016 is part of the KINGCONN Micro SD ( T-Flash ) series (Memory Card Slots). The catalogue description reads, verbatim: "Micro SD PUSH 10u"". Everything stated on this page comes from engineering drawing 7MSDP-BA-1016, revision A, which downloads from this page.
Materials and markings as recorded on the drawing: Contact material Copper Alloy C5210R; UL flammability rating UL 94V-0; Housing colour Black. The part is marked RoHS compliant.
The KINGCONN Micro SD ( T-Flash ) series lists 19 models.
Across the series, mated heights cover 1.15mm, 1.28mm, 1.29mm, 1.45mm, 1.5mm and 1.68mm; pitches cover 0.7mm, 0.9mm and 1.1mm; durability is rated at 3,000, 5,000 or 10,000 cycles; contact counts span 8–11 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Operating voltage 100V DC Max; Current rating 0.5A DC Max; Withstand voltage 500V AC; Contact resistance 100mΩ Max; Insulation resistance 100MΩ Min; Operating temperature -25° C To +85° C; Durability 10000 Cycles.
Micro SD ( T-Flash ) series Micro SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7MSDP-BA-1016, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Micro SD ( T-Flash ) series part (Memory Card Slots). The catalogue description is "Micro SD PUSH 10u"", and the source drawing is 7MSDP-BA-1016 revision A.
From source drawing 7MSDP-BA-1016 (revision A): Operating voltage 100V DC Max; Current rating 0.5A DC Max; Withstand voltage 500V AC; Contact resistance 100mΩ Max; Insulation resistance 100MΩ Min; Operating temperature -25° C To +85° C; Durability 10000 Cycles; Contact material Copper Alloy C5210R; UL flammability rating UL 94V-0; Housing colour Black; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7MSDP-BA-1016 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7MSDP-BA-1016 rev. A