Series
CategoryMemory Card Slots
SeriesMicro SD ( T-Flash )
MODEL7MSDP-AA-1110
DescriptionMicro SD Memory Card Socket Reverse Type
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
Memory Card Slots · Micro SD ( T-Flash )
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
7MSDP-AA-1110 is a Micro SD (T-Flash) memory card socket, reverse type, in KINGCONN's micro-sd series. It has a pitch of 1.10 mm, a dimension relevant to board layout and connector footprint. Connectors of this type are used in embedded controllers, industrial cameras, data loggers and handheld devices that read removable storage. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7MSDP-AA-1110 is part of the KINGCONN Micro SD ( T-Flash ) series (Memory Card Slots). The catalogue description reads, verbatim: "Micro SD Memory Card Socket Reverse Type". Everything stated on this page comes from engineering drawing 7MSDP-AA-1110-B, revision B, which downloads from this page.
A reverse-type socket flips the card opening and contact orientation, to suit layouts where the card slot faces the opposite way to the component side.
The drawing marks this part RoHS compliant.
The KINGCONN Micro SD ( T-Flash ) series lists 19 models.
Across the series, mated heights cover 1.15mm, 1.28mm, 1.29mm, 1.45mm, 1.5mm and 1.68mm; pitches cover 0.7mm, 0.9mm and 1.1mm; durability is rated at 3,000, 5,000 or 10,000 cycles; contact counts span 8–11 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Pitch 1.10 mm.
Micro SD ( T-Flash ) series Micro SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7MSDP-AA-1110-B, revision B — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Micro SD ( T-Flash ) series part (Memory Card Slots). The catalogue description is "Micro SD Memory Card Socket Reverse Type", and the source drawing is 7MSDP-AA-1110-B revision B.
From source drawing 7MSDP-AA-1110-B (revision B): Pitch 1.10 mm; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7MSDP-AA-1110-B drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7MSDP-AA-1110-B rev. B