Series
CategoryMemory Card Slots
SeriesMicro SD ( T-Flash )
MODEL7MSDH-F0-1012
DescriptionMicro SD CONNECTOR HINGE TYPE
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
Memory Card Slots · Micro SD ( T-Flash )
Request quote / sampleAdd to RFQ cart← Back to Micro SD ( T-Flash )
7MSDH-F0-1012 is a hinge-type Micro SD (T-Flash) memory card connector in KINGCONN's micro-sd series. It operates at 5V with a current rating of 0.5 A max, withstand voltage of 250V AC R.M.S. for 1 minute, contact resistance of 100mΩ max, and insulation resistance of 500MΩ min at 5V DC, over an operating temperature range of -20°C to +85°C. The housing uses THERMOPLASTIC LCP S475+30%GF and the contact is COPPER ALLOY C5191R-EH, T=0.15mm, with a UL94 V-0 flammability rating. Connectors of this type are used in embedded controllers, industrial cameras, data loggers and handheld devices that read removable storage. The part is RoHS compliant, and the engineering drawing is available for download on this page.
7MSDH-F0-1012 is part of the KINGCONN Micro SD ( T-Flash ) series (Memory Card Slots). The catalogue description reads, verbatim: "Micro SD CONNECTOR HINGE TYPE". Everything stated on this page comes from engineering drawing 7MSDH-F0-1012, revision F, which downloads from this page.
A hinge-type socket takes the card in a lid that folds down and latches, holding the card under the cover — useful where the assembly sees vibration; the trade-off is the swing clearance the lid needs above the socket.
Materials and markings as recorded on the drawing: Housing material THERMOPLASTIC LCP S475+30%GF, UL94 V-0; Contact material COPPER ALLOY, C5191R-EH, T=0.15mm; Shell material SUS304-1/2H , T=0.20mm; UL flammability rating UL94 V-0. The part is marked RoHS compliant.
The KINGCONN Micro SD ( T-Flash ) series lists 19 models.
Across the series, mated heights cover 1.15mm, 1.28mm, 1.29mm, 1.45mm, 1.5mm and 1.68mm; pitches cover 0.7mm, 0.9mm and 1.1mm; durability is rated at 3,000, 5,000 or 10,000 cycles; contact counts span 8–11 positions — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Operating voltage 5V; Current rating 0.5 A. MAX; Withstand voltage 250V AC R.M.S. FOR 1 MINUTE; Contact resistance 100mΩ MAX; Insulation resistance 500MΩ MIN. AT 5V DC; Operating temperature -20° C TO +85° C.
Micro SD ( T-Flash ) series Micro SD Card Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7MSDH-F0-1012, revision F — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Micro SD ( T-Flash ) series part (Memory Card Slots). The catalogue description is "Micro SD CONNECTOR HINGE TYPE", and the source drawing is 7MSDH-F0-1012 revision F.
From source drawing 7MSDH-F0-1012 (revision F): Operating voltage 5V; Current rating 0.5 A. MAX; Withstand voltage 250V AC R.M.S. FOR 1 MINUTE; Contact resistance 100mΩ MAX; Insulation resistance 500MΩ MIN. AT 5V DC; Operating temperature -20° C TO +85° C; Housing material THERMOPLASTIC LCP S475+30%GF, UL94 V-0; Contact material COPPER ALLOY, C5191R-EH, T=0.15mm; Shell material SUS304-1/2H , T=0.20mm; UL flammability rating UL94 V-0; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7MSDH-F0-1012 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7MSDH-F0-1012 rev. F