7MSD4-F0-0007Micro SD 4.0

Overview

7MSD4-F0-0007 is a push-type Micro SD 4.0 memory card connector in KINGCONN's micro-sd-4-0 series, described as Micro SD 4.0 PUSH REVERSD. It has a pitch of 0.8 mm, defining the spacing of its contact terminals on the board. Connectors of this type are used in embedded controllers, industrial cameras, data loggers and handheld devices that read removable storage. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.

What this part is

7MSD4-F0-0007 is part of the KINGCONN Micro SD 4.0 series (Memory Card Slots). The catalogue description reads, verbatim: "Micro SD 4.0 PUSH REVERSD". Everything stated on this page comes from engineering drawing 7MSD4-F0-0007, revision A, which downloads from this page.

A reverse-type socket flips the card opening and contact orientation, to suit layouts where the card slot faces the opposite way to the component side.

The drawing marks this part RoHS compliant.

This model, or another one in the series?

The KINGCONN Micro SD 4.0 series lists 5 models.

Across the series, mated heights cover 1.3mm, 1.5mm, 1.63mm and 1.67mm — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Pitch 0.8 mm.

Micro SD 4.0 series

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7MSD4-F0-0007, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7MSD4-F0-0007 connector?

It is a KINGCONN Micro SD 4.0 series part (Memory Card Slots). The catalogue description is "Micro SD 4.0 PUSH REVERSD", and the source drawing is 7MSD4-F0-0007 revision A.

What are the specifications of 7MSD4-F0-0007?

From source drawing 7MSD4-F0-0007 (revision A): Pitch 0.8 mm; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7MSD4-F0-0007?

Yes. The 7MSD4-F0-0007 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7MSD4-F0-0007 rev. A