7DCJK-F0-0024JACK

Overview

7DCJK-F0-0024 is a DC Jack SMT connector in KINGCONN's dc-jack series, used for power connections (Power Connectors / JACK category). It carries a current rating of 1.0A, a withstand voltage of 500VAC, contact resistance of ≤ 30mΩ, and insulation resistance of ≥ 100MΩ, with an operating temperature range of -30 C~70 C and a durability rating of 5,000 cycles. The housing is high temperature resistant plastic with copper alloy contacts. Connectors of this type are used in power adapters, embedded boards and consumer electronics requiring DC power input. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.

What this part is

7DCJK-F0-0024 is part of the KINGCONN JACK series (Power Connectors). The catalogue description reads, verbatim: "DC JACk SMT". Everything stated on this page comes from engineering drawing 7DCJK-F0-0024, revision B, which downloads from this page.

SMT means the terminals solder to the board surface, so the part goes through the same reflow pass as the rest of the surface-mount components.

Materials and markings as recorded on the drawing: Housing material HIGH TEMPERATURE RESISTANT PLASTIC; Contact material COPPER ALLOY. The part is marked RoHS compliant.

This model, or another one in the series?

The KINGCONN JACK series lists 6 models.

This model's own drawing states: Current rating 1.0A; Withstand voltage 500VAC; Contact resistance ≤ 30mΩ; Insulation resistance ≥ 100MΩ; Operating temperature -30 C~70 C; Durability 5,000.

JACK series  Circuit Board Power Connectors: DC Power Jack & Cable Assembly

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7DCJK-F0-0024, revision B — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7DCJK-F0-0024 connector?

It is a KINGCONN JACK series part (Power Connectors). The catalogue description is "DC JACk SMT", and the source drawing is 7DCJK-F0-0024 revision B.

What are the specifications of 7DCJK-F0-0024?

From source drawing 7DCJK-F0-0024 (revision B): Current rating 1.0A; Withstand voltage 500VAC; Contact resistance ≤ 30mΩ; Insulation resistance ≥ 100MΩ; Operating temperature -30 C~70 C; Durability 5,000; Housing material HIGH TEMPERATURE RESISTANT PLASTIC; Contact material COPPER ALLOY; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7DCJK-F0-0024?

Yes. The 7DCJK-F0-0024 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7DCJK-F0-0024 rev. B