7DCJK-F0-0020JACK

Overview

7DCJK-F0-0020, marketed as DC POWER JACK 2.0, is a power jack connector in KINGCONN's dc-jack series. It is rated for an operating voltage of DC 30V and a current rating of 3.0A, with a withstand voltage of AC500V(50Hz)/min. Contact resistance is ≤0.03Ω and insulation resistance is ≥100MΩ, and the connector operates across a temperature range of -30~70℃. DC power jacks of this type are commonly used in consumer electronics, power adapters, and small appliance chargers requiring a plug-in DC power connection. The engineering drawing is available for download on this page.

What this part is

7DCJK-F0-0020 is part of the KINGCONN JACK series (Power Connectors). The catalogue description reads, verbatim: "DC POWER JACK 2.0". Everything stated on this page comes from engineering drawing 7DCJK-F0-0020, revision A, which downloads from this page.

This model, or another one in the series?

The KINGCONN JACK series lists 6 models.

This model's own drawing states: Operating voltage DC 30V; Current rating 3.0A; Withstand voltage AC500V(50Hz)/min; Contact resistance ≤0.03Ω; Insulation resistance ≥100MΩ; Operating temperature -30~70℃.

JACK series  Circuit Board Power Connectors: DC Power Jack & Cable Assembly

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7DCJK-F0-0020, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7DCJK-F0-0020 connector?

It is a KINGCONN JACK series part (Power Connectors). The catalogue description is "DC POWER JACK 2.0", and the source drawing is 7DCJK-F0-0020 revision A.

What are the specifications of 7DCJK-F0-0020?

From source drawing 7DCJK-F0-0020 (revision A): Operating voltage DC 30V; Current rating 3.0A; Withstand voltage AC500V(50Hz)/min; Contact resistance ≤0.03Ω; Insulation resistance ≥100MΩ; Operating temperature -30~70℃. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7DCJK-F0-0020?

Yes. The 7DCJK-F0-0020 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7DCJK-F0-0020 rev. A