7MSD7-F0-0002Micro SD 7.0 & Micro SD 8.0

Overview

7MSD7-F0-0002 is a push-push type Micro SD memory card connector in KINGCONN's Micro SD series. It has a mated height of 2.25 mm, suitable for low-profile board designs where vertical clearance is limited. Connectors of this type are used in embedded controllers, industrial cameras, data loggers and handheld devices that read removable storage. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.

What this part is

7MSD7-F0-0002 is part of the KINGCONN Micro SD 7.0 & Micro SD 8.0 series (Memory Card Slots). The catalogue description reads, verbatim: "Micro SD 7.1 H2.25 PUSH-PUSH". Everything stated on this page comes from engineering drawing 7MSD7-F0-0002, revision A, which downloads from this page.

Push-push means the card latches when pushed fully in and ejects when pushed again. Unlike a hinge-type socket it needs no clearance for an ejector lever, and it gives the user a positive tactile latch.

The drawing marks this part RoHS compliant.

This model, or another one in the series?

The KINGCONN Micro SD 7.0 & Micro SD 8.0 series lists 3 models.

Across the series, mated heights cover 2.25mm, 2.27mm and 2.525mm — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.

This model's own drawing states: Mated height 2.25 mm.

Micro SD 7.0 & Micro SD 8.0 series

Drawing and RFQ

The engineering drawing (PDF) downloads directly from this page — drawing 7MSD7-F0-0002, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.

For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.

the KINGCONN homepage

Frequently asked questions

What is the 7MSD7-F0-0002 connector?

It is a KINGCONN Micro SD 7.0 & Micro SD 8.0 series part (Memory Card Slots). The catalogue description is "Micro SD 7.1 H2.25 PUSH-PUSH", and the source drawing is 7MSD7-F0-0002 revision A.

What are the specifications of 7MSD7-F0-0002?

From source drawing 7MSD7-F0-0002 (revision A): Mated height 2.25 mm; RoHS compliant. The specification table further down this page lets you check every value.

How do I request a sample or a quotation?

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Is a drawing available for 7MSD7-F0-0002?

Yes. The 7MSD7-F0-0002 drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.

Specifications

Source: engineering drawing for this part number 7MSD7-F0-0002 rev. A