Series
CategoryMemory Card Slots
SeriesMicro SD 4.0
MODEL7MSD4-FA-0001
DescriptionMicro SD4.0 Top Push/Push Type H1.30mm
7MSD4-FA-0001 is a top push/push type Micro SD 4.0 memory card connector in KINGCONN's Micro SD 4.0 series. It has a mated height of 1.30 mm, an operating voltage of 10V, a current rating of 0.5A min., and a withstand voltage of 500V AC/Minute, with contact resistance of 100mohms and insulation resistance of 1000Mohms. The housing is thermal plastic rated UL94V-0, contacts are phosphor copper, and the shell is stainless steel, rated for -20°C to +60°C operation and 3000 insertions. Connectors of this type are used in embedded systems, industrial cameras, and handheld devices that read removable storage. The part is RoHS compliant, and the engineering drawing (PDF) is available for download on this page.
7MSD4-FA-0001 is part of the KINGCONN Micro SD 4.0 series (Memory Card Slots). The catalogue description reads, verbatim: "Micro SD4.0 Top Push/Push Type H1.30mm". Everything stated on this page comes from engineering drawing 7MSD4-FA-0001-A, revision A, which downloads from this page.
Push-push means the card latches when pushed fully in and ejects when pushed again. Unlike a hinge-type socket it needs no clearance for an ejector lever, and it gives the user a positive tactile latch.
Materials and markings as recorded on the drawing: Housing material Thermal Plastic, Rated UL94V-0; Contact material Phosphor Copper; Shell material Stainless steel; UL flammability rating UL94V-0. The part is marked RoHS compliant.
The KINGCONN Micro SD 4.0 series lists 5 models.
Across the series, mated heights cover 1.3mm, 1.5mm, 1.63mm and 1.67mm — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Mated height 1.30 mm; Contact counts 18; Operating voltage 10V; Current rating 0.5A min; Withstand voltage 500V AC/Minute; Contact resistance 100mohms; Insulation resistance 1000Mohms; Operating temperature -20°C to +60°C; Durability 3000 insertions.
The engineering drawing (PDF) downloads directly from this page — drawing 7MSD4-FA-0001-A, revision A — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN Micro SD 4.0 series part (Memory Card Slots). The catalogue description is "Micro SD4.0 Top Push/Push Type H1.30mm", and the source drawing is 7MSD4-FA-0001-A revision A.
From source drawing 7MSD4-FA-0001-A (revision A): Mated height 1.30 mm; Contact counts 18; Operating voltage 10V; Current rating 0.5A min; Withstand voltage 500V AC/Minute; Contact resistance 100mohms; Insulation resistance 1000Mohms; Operating temperature -20°C to +60°C; Durability 3000 insertions; Housing material Thermal Plastic, Rated UL94V-0; Contact material Phosphor Copper; Shell material Stainless steel; UL flammability rating UL94V-0; RoHS compliant. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7MSD4-FA-0001-A drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
Source: engineering drawing for this part number 7MSD4-FA-0001-A rev. A