Series
CategoryMemory Card Slots
SeriesCF
MODEL7CFHD-F9-9008
DescriptionCF Card Header Normal Slim Type
7CFHD-F9-9008 is a CF Card Header of the Normal Slim Type in KINGCONN's CF series of memory card slots. Its housing is molded from high temperature thermoplastic, and its contacts are copper alloy plated with gold flash over 50u" min. nickel, with solder tails plated 100u" min. Sn over nickel. Connectors of this type are used in devices that read Compact Flash storage, such as industrial computers, cameras and data acquisition equipment. The engineering drawing (PDF) is available for download on this page.
7CFHD-F9-9008 is part of the KINGCONN CF series (Memory Card Slots). The catalogue description reads, verbatim: "CF Card Header Normal Slim Type". Everything stated on this page comes from engineering drawing 7CFHD-X9-9008-C, revision C, which downloads from this page.
Materials and markings as recorded on the drawing: Housing material HIGH TEMPERATURE THERMOPLASTIC; Contact material COPPER ALLOY; Plating GOLD FLASH OVER 50u"MIN.NICKEL SOLDER TAIL:100u"min.Sn OVER NICKEL.
The KINGCONN CF series lists 8 models.
Across the series, pitches cover 0.635mm and 1.27mm — those are series ranges, not this model's values; read the individual drawing for the model you shortlist.
This model's own drawing states: Pitch 0.635 mm.
CF series CFast, CF & CFexpress Connector (Socket) Selection Guide
This part belongs to the Memory Card Slots group. These application pages set out the connector considerations for each:
The engineering drawing (PDF) downloads directly from this page — drawing 7CFHD-X9-9008-C, revision C — with dimensions and pin assignment. Every cell of the specification table below comes from that drawing.
For samples or pricing use the RFQ button on this page; the subject line is pre-filled with the part number.
It is a KINGCONN CF series part (Memory Card Slots). The catalogue description is "CF Card Header Normal Slim Type", and the source drawing is 7CFHD-X9-9008-C revision C.
From source drawing 7CFHD-X9-9008-C (revision C): Pitch 0.635 mm; Housing material HIGH TEMPERATURE THERMOPLASTIC; Contact material COPPER ALLOY; Plating GOLD FLASH OVER 50u"MIN.NICKEL SOLDER TAIL:100u"min.Sn OVER NICKEL. The specification table further down this page lets you check every value.
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Yes. The 7CFHD-X9-9008-C drawing PDF downloads from this page with dimensions and pin assignment; every cell of the specification table traces back to it.
This part is a same-interface replacement candidate for the following discontinued part numbers (matches reviewed by KINGCONN R&D). Ask KINGCONN before ordering: send the original part number or your drawing, and R&D confirms pin-out and footprint first.
Source: engineering drawing for this part number 7CFHD-X9-9008-C rev. C